- NO LONGER AVAILABLE
- Wide range of test frequencies: 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz
- Measure: Resistance, Capacitance, Inductance, D,Q & Phase
- USB interface for Data Storage of LCR Results   (optional) NEW LabView Driver below;
- Allows for 4-Wire Kelvin Measurement to factor out impedance of test leads
- Backlit 20,000/2,000 count display
- Component sorting function with selectable PASS/FAIL tolerances
- Selectable: series or parallel LCR Meter
- Light weight Handheld LCR Meter
- Alligator Leads included, SMD tweezers available as an option
If you are looking for a higher preforming benchtop LCR Meter See our LCR Meter Selection Guide
The DE-6000 is a high-performance handheld LCR meter that is full-featured yet cost effective. The 0.2% basic accuracy and optional USB interface for data transfer separates the DE-6000 from other handheld LCR meters. IET offers optional accredited calibration data on the DE-6000.
The DE-6000 measures:
Ls/Lp -- Series and parallel inductance
Cs/Cp -- Series and parallel capacitance
Rs/Rp -- Series and parallel resistance (ac)
Rdc/Rp -- Series and parallel resistance (dc)
ESR/Rp -- Series and parallel equivalent resistance
D -- Dissipation factor
Q -- Quality factor
Θ -- Phase angle
This handheld LCR meter can transfer data to a PC via a optional, fully isolated, optical IR-USB interface. It also features a Sorting mode, allowing users to quickly sort components.
The DE-6000 handheld LCR Meter has automatic impedance selection. This allows the user to measure the L/C/R components in Auto LCR mode without having to select the type of measurement.
To accommodate various test requirements, the DE-6000 handheld LCR Meter offers selectable test frequencies: 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz.
The LCR Meter is powered by a standard 9V battery. For additional convenience, it may also use an optional ac adapter (DE-6000-AC).
To transfer data to a PC, the LCR Meter comes with a built-in IR interface. IET offers an optional Data Transfer Kit (DE-6000-DTK). This kit includes: IR-USB interface adapter, a USB cable, and a CD with software for the PC.
Use the link to download the DE-6000 PC Software Zip
Unzip the folder and follow the instructions to install.
The USB interface on the DE-6000 uses an FTDI chip set. Normally when the DE-6000 is connected to a computer using the USB port, Windows 7 and higher will search for the correct driver and as long as the computer is connected to the internet the driver should automatically be installed. If the driver is not automatically installed the drivers can be installed from FTDI Virtual COM Port Drivers website
NEW LabVIEW Driver for DE-6000 is available for collecting data from the DE-6000. The driver is written in LabVIEW 2013 and requires the optional DE-6000-DTK IR-USB interface adapter.
Please request a copy of the DE-6000 LabVIEW Driver when ordering or send your request to SALES@IETLABS.COM
If you are looking for a higher preforming benchtop LCR Meter See our LCR Meter Selection Guide
DE-6000 Standard Package Includes:
- LCR meter DE-6000-LCR
- Carrying case DE-5000-CS
- Alligator-clip test-lead adapter TL-21(4-wire joined at alligator clips) -See Photo in top right
- Guard lead TL-23
- Standard 9 V battery DE-5000-9V
- Instruction manual DE-6000-IM
DE-6000 Handheld LCR Meter Basic Specifications
(See datasheet for full specifications)Parameters measured:Ls / Lp / Cs / Cp / Rs / Rp / DCR with D/Q/Θ/ESR measurement
Automatic L-C-R selection
Accuracy:
As good as 0.2% Accuracy See datasheet for more info
Selectable test model:
Series or Parallel
Display:
Backlit 20,000/2,000 LCR Meter count
Input connection:
Accepts normal or shrouded banana plugs 2-Wire plus separate Guard
Automated LCR ranges:
L: 20.000 μH -- 2000 H
C: 200.00 pF -- 20.00 mF
R: 20.000 Ω -- 200.0 MΩ
DCR: 200.00 Ω -- 200.0 MΩ
Selectable test frequencies:
100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz
Measurement rate:
1.2/second nominal
Available tolerances for sorting function:
±0.25% ±5% ±0.5% ±10% ±1% ±20% ±2% -20/+80%
Response time:
Approx. 1 second/DUT
Temperature coefficient:
[0.15 x (specified accuracy)]/°C 0-18°C, 28-50°C
Test signal level:
0.5 Vrms Typical
Environmental:
LCR Meter Operating temperature: 0°C to 50°C; <70% RH
LCR Meter Storage temperature: -20°C to 60°C; <80% RH
Battery:
Uses a standard 9V alkaline battery. Display includes battery level indicator
Mechanical:
Dimensions: 18.8 cm H x 9.5 cm W, 5.3 mm D (7.4" x 3.75" x 2")
Weight: 350 g (0.75 lb)