- Widerstand von 10 Ω bis 100 GΩ
- Hohe Genauigkeit: bis zu 0,01%, 3 Genauigkeitsklassen verfügbar
- Spannung bis 2000 V
- Ausgezeichnetes TC: so niedrig wie 5 ppm / ° C
- Niedriger Spannungskoeffizient: so niedrig wie 0,2 ppm / V
- Resistance from 10 Ω to 100 GΩ
- High-accuracy: up to .01%, 3 Accuracy Classes Available
- Voltage up to 2000 V
- Excellent TC: as low as 5 ppm/°C
- Low voltage coefficient: as low as 0.2 ppm/V
- High-performance solid silver-alloy switches
- Rack mounting available
The High Resistance (HRRS Series) is an economical, high-performance, high-resistance decade box for all laboratory, test, and calibration needs. The High-resistance design is implemented with special resistors, switches, binding posts, and construction-design to allow high resistance performance without sacrificing other electrical properties. These instruments are useful wherever small currents and high resistances are required,
The HRRS Series employs state-of-the-art precision resistors of various types for high accuracy, high stability, and low temperature and voltage coefficients. The standard models offer a choice of one to seven decades. For custom units, models up to 11 decades are available . For higher voltage or higher resistance, models up to >10 kV and 10 TΩ are also available in the HRRS-5kV & -10kV Series.
The binding posts are for the HRRS high resistance decade boxes are insulated with Kel-F high-resistance, non-moisture-absorbing material ensure low leakage.
With a resolution as low as 10 Ω and a maximum available resistance of over 100 G&Omega, the HRRS Series may be used for exacting precision high-value resistance applications.
The HRRS series decade box complements the HARS series which provides resistance steps as low as 1 mΩ. The units may be rack-mounted to serve as components in measurement and control systems.
HRRS High Resistance Decade Box Applications
- calibration of meters and megohmmeters,
- checking of electrochemical and biomedical sensors and instruments.
- testing high-impedance amplifiers and the insulation of low-power circuits.
HRRS Basic Specifications
Resistance per step
|
Total decade resistance
|
Accuracy
|
Max voltage per step (V)
|
Maximum Voltage (V)
|
Temperature coefficient (ppm/C)
|
Voltage coefficient (ppm/V)
|
Stability (ppm/yr)
|
Resistor Type
|
||
Q
|
B
|
F
|
||||||||
10Ω | 100Ω | 0.01% | 0.03% | 0.10% | 2.5 | 25 | 15 | 0 | 10 | Wirewound, non-inductive |
100Ω | 1kΩ | 0.01% | 0.03% | 0.10% | 8 | 80 | 5 | 0 | 10 | Wirewound, non-inductive |
1kΩ | 10kΩ | 0.01% | 0.03% | 0.10% | 23 | 230 | 5 | 0 | 10 | Wirewound, non-inductive |
10kΩ | 100kΩ | 0.01% | 0.03% | 0.10% | 70 | 700 | 5 | 0 | 10 | Wirewound, non-inductive |
100kΩ | 1MΩ | 0.01% | 0.03% | 0.10% | 230 | 2000 | 5 | 0 | 10 | Wirewound, non-inductive |
1MΩ | 10MΩ | 0.01% | 0.03% | 0.10% | 1000* | 2000 | 15 | 0.2 | 25 | Metal-oxide film |
10MΩ | 100MΩ | 0.03% | 0.10% | 1% | 1000* | 2000 | 15 | 0.2 | 50 | Metal-oxide film |
100MΩ | 1GΩ | 0.10% | 0.20% | 1% | 1000* | 2000 | 15 | 1.5 | 100 | Metal-oxide film |
1GΩ | 10GΩ | 0.20% | 0.50% | 1% | 1000* | 2000 | 50 | 5 | 500 | High-voltage film |
10GΩ | 100GΩ | 0.50% | 1% | 1% | 1000* | 2000 | 50 | 5 | 500 | High-voltage film |
100GΩ | 1TΩ | 0.50% | 1% | 1% | 1000* | 2000 | 100 | 5 | 500 | High-voltage film |